Barca logoRobotics
Support case

Mounting hole misalignment on NXB-GEN-611-015 Perimeter Guard Panel

Industrial Robotics & Maintenance Parts case CASE-00325 ... The pre-drilled holes on the panel are approximately 5mm off from the corresponding ... Safety cell installation is halted.

Need more help?

Escalate once the self-serve checks are complete.

Use the resolution summary below first. If the symptom remains, contact support with the case ID, error code, and product details so the next step can be triaged quickly.

Resolution summary

Industrial Robotics & Maintenance Parts case CASE-00325 ... The pre-drilled holes on the panel are approximately 5mm off from the corresponding ... Safety cell installation is halted.

Resolution steps
  1. Review the resolution summary and confirm the fault on the affected robot or cell.
Escalation path

Contact Barca Robotics support if the issue continues after you complete the recommended checks.

Related documentation
Documentation
TroubleshootingNXB-GEN-611-015
Troubleshooting Damaged or Misaligned NexBot Vision 611-015 Perimeter Guard Panels

... damage or misalignment issues with the NXB-GEN-611-015 safety fence panel to maintain workcell ... safety fence perimeter guard NXB-GEN-611-015 panel damage robot cell safety fencing alignment ...

Documentation
TroubleshootingNXB-GEN-611-005
Troubleshooting Damaged or Misaligned NXB-GEN-611-005 Perimeter Guard Panels

Troubleshooting Damaged or Misaligned NXB-GEN-611-005 Perimeter Guard Panels ... Torque wrench ... Carefully examine the affected NXB-GEN-611-005 Perimeter Guard Panel and its mounting points.

Documentation
TroubleshootingNXB-GEN-611-019
Troubleshooting Damaged or Misaligned NXB-GEN-611-019 Perimeter Guard Panels

Troubleshooting Damaged or Misaligned NXB-GEN-611-019 Perimeter Guard Panels ... NXB-GEN-611-019 perimeter guard safety fencing robot cell safety panel alignment bent fence damaged panel ...

Continue case review

Continue troubleshooting

Keep this case open, then use the global header search when you want the assistant to continue from the current case, error code, and product details.